We are in the process of migrating this forum. A new space will be available soon. We are sorry for the inconvenience.

Kimsufi Limited edition + 3 IP Failover na sprzedaż !


Spacedust
10-03-2015, 12:50
Sprzedany za 70 zł

Arkoso
10-03-2015, 12:08
Odezwij się na biuro@fastteam.pl badz gg 1419796

Spacedust
07-03-2015, 00:16
Mam na sprzedaż Kimsufi Limited edition, które były sprzedawane tylko w abonamencie rocznym !

Procesor: Intel Atom D425 1.8 GHz
Płyta główna: Intel D425KT
RAM: 4 GB DDR3 800 MHz (2x2 GB)
Dysk: TOSHIBA DT01ACA200 2 TB
Łącze: 100 Mbps bez limitu
W cenie jest 1 IP główne + 3 IP failover (z różnych pul adresowych, jeden z USA, dwa z Kanady)
Lokalizacja: centrum BHS-1 (Kanada)

Miesięcznie: 38.63 PLN netto / 47.51 PLN brutto (rozliczany jeszcze w złotówkach, a nie jak w Euro teraz)

Serwer jest ważny do 30 marca 2015 r.

Serwer jest w panelu OVH.pl, a nie Kimsufi.pl - ma pełne wsparcie techniczne !

SMART dysku:

Kod:
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-2.6.32-504.8.1.el6.x86_64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 3.5" HDD DT01ACA...
Device Model:     TOSHIBA DT01ACA200
Serial Number:    23HLWNVGS
LU WWN Device Id: 5 000039 ff3c8968f
Firmware Version: MX4OABB0
User Capacity:    2,000,398,934,016 bytes [2,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Fri Mar  6 18:19:49 2015 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (15396) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 257) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   138   138   054    Pre-fail  Offline      -       74
  3 Spin_Up_Time            0x0007   129   129   024    Pre-fail  Always       -       290 (Average 295)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       12
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   126   126   020    Pre-fail  Offline      -       32
  9 Power_On_Hours          0x0012   099   099   000    Old_age   Always       -       13990
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       11
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       19
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       19
194 Temperature_Celsius     0x0002   181   181   000    Old_age   Always       -       33 (Min/Max 16/44)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     13960         -
# 2  Extended offline    Completed without error       00%     12722         -
# 3  Extended offline    Completed without error       00%     10322         -
# 4  Short offline       Completed without error       00%      6282         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.