We are in the process of migrating this forum. A new space will be available soon. We are sorry for the inconvenience.

[Sprzedam] Kimsufi 2G z łączem bez limitów transferu


WMP
29-01-2013, 18:05
Sprzedane

WMP
25-01-2013, 17:03
procesor: model name : Intel(R) Atom(TM) CPU D425 @ 1.80GHz
dysk:
Kod:
smartctl --all /dev/sda
smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     ST31000528AS
Serial Number:    6VP4MHQV
Firmware Version: CC38
User Capacity:    1,000,204,886,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Fri Jan 25 17:02:04 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                 ( 600) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 182) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x103f) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   120   099   006    Pre-fail  Always       -       240402878
  3 Spin_Up_Time            0x0003   096   095   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       102
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   085   060   030    Pre-fail  Always       -       343050722
  9 Power_On_Hours          0x0032   085   085   000    Old_age   Always       -       13368
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       51
183 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
184 Unknown_Attribute       0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   060   060   000    Old_age   Always       -       40
188 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   099   099   000    Old_age   Always       -       1
190 Airflow_Temperature_Cel 0x0022   065   052   045    Old_age   Always       -       35 (Lifetime Min/Max 32/36)
194 Temperature_Celsius     0x0022   035   048   000    Old_age   Always       -       35 (0 18 0 0)
195 Hardware_ECC_Recovered  0x001a   050   009   000    Old_age   Always       -       240402878
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       10
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       10
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       102233106560162
241 Unknown_Attribute       0x0000   100   253   000    Old_age   Offline      -       2065293213
242 Unknown_Attribute       0x0000   100   253   000    Old_age   Offline      -       3307536064

SMART Error Log Version: 1
ATA Error Count: 36 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 36 occurred at disk power-on lifetime: 13358 hours (556 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 ff ff ff ef 00   4d+19:24:57.933  READ DMA EXT
  27 00 00 00 00 00 e0 00   4d+19:24:57.932  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00   4d+19:24:57.924  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00   4d+19:24:57.919  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00   4d+19:24:57.900  READ NATIVE MAX ADDRESS EXT

Error 35 occurred at disk power-on lifetime: 13358 hours (556 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 ff ff ff ef 00   4d+19:24:54.765  READ DMA EXT
  27 00 00 00 00 00 e0 00   4d+19:24:54.764  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00   4d+19:24:54.755  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00   4d+19:24:54.747  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00   4d+19:24:54.728  READ NATIVE MAX ADDRESS EXT

Error 34 occurred at disk power-on lifetime: 13358 hours (556 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 ff ff ff ef 00   4d+19:24:51.584  READ DMA EXT
  27 00 00 00 00 00 e0 00   4d+19:24:51.583  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00   4d+19:24:51.575  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00   4d+19:24:51.567  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00   4d+19:24:51.547  READ NATIVE MAX ADDRESS EXT

Error 33 occurred at disk power-on lifetime: 13358 hours (556 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 ff ff ff ef 00   4d+19:24:48.412  READ DMA EXT
  27 00 00 00 00 00 e0 00   4d+19:24:48.411  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00   4d+19:24:48.402  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00   4d+19:24:48.395  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00   4d+19:24:48.375  READ NATIVE MAX ADDRESS EXT

Error 32 occurred at disk power-on lifetime: 13358 hours (556 days + 14 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 ff ff ff ef 00   4d+19:24:45.215  READ DMA EXT
  27 00 00 00 00 00 e0 00   4d+19:24:45.214  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00   4d+19:24:45.206  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00   4d+19:24:45.198  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00   4d+19:24:45.178  READ NATIVE MAX ADDRESS EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      3359         -
# 2  Short offline       Completed without error       00%      3351         -
# 3  Short offline       Completed without error       00%      3351         -
# 4  Short offline       Completed without error       00%      2335         -
# 5  Short offline       Completed without error       00%      2328         -
# 6  Short offline       Completed without error       00%      2328         -
# 7  Short offline       Completed without error       00%      1373         -
# 8  Short offline       Completed without error       00%      1365         -
# 9  Short offline       Completed without error       00%      1365         -
#10  Short offline       Completed without error       00%      1365         -
#11  Short offline       Completed without error       00%      1363         -
#12  Short offline       Completed without error       00%         5         -
#13  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Opłata miesięczna: 60zł