OVH Community, your new community space.

uszkodzny dysk czy cos innego ?


Spacedust
15-03-2012, 20:36
Uszkodzony, szybko się zawinął

Kod:
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       88
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       88

andriu-m
15-03-2012, 19:28
serwer EG Hybrid 2011
Kod:
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     ST2000DM001-9YN164
Serial Number:    Z2F038JB
Firmware Version: CC9C
User Capacity:    2,000,398,934,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Thu Mar 15 20:22:26 2012 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 ( 592) seconds.
Offline data collection
capabilities: 			 (0x73) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 247) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x3081)	SCT Status supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   096   084   006    Pre-fail  Always       -       37214126
  3 Spin_Up_Time            0x0003   093   092   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       41
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   078   060   030    Pre-fail  Always       -       62236922
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       692
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       41
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       4992
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   062   060   045    Old_age   Always       -       38 (Lifetime Min/Max 32/40)
191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       40
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       392
194 Temperature_Celsius     0x0022   038   040   000    Old_age   Always       -       38 (0 18 0 0)
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       88
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       88
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       60692182860437
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       98735243966625
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       98176582690

SMART Error Log Version: 1
ATA Error Count: 4992 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 4992 occurred at disk power-on lifetime: 692 hours (28 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00  14d+12:36:31.542  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00  14d+12:36:31.542  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 e0 00  14d+12:36:31.542  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00  14d+12:36:31.541  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00  14d+12:36:31.541  SET FEATURES [Set transfer mode]

Error 4991 occurred at disk power-on lifetime: 692 hours (28 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00  14d+12:36:28.650  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00  14d+12:36:28.650  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 e0 00  14d+12:36:28.650  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00  14d+12:36:28.649  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00  14d+12:36:28.649  SET FEATURES [Set transfer mode]

Error 4990 occurred at disk power-on lifetime: 692 hours (28 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00  14d+12:36:25.749  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00  14d+12:36:25.749  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 e0 00  14d+12:36:25.749  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00  14d+12:36:25.749  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00  14d+12:36:25.749  SET FEATURES [Set transfer mode]

Error 4989 occurred at disk power-on lifetime: 692 hours (28 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00  14d+12:36:22.857  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00  14d+12:36:22.857  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 e0 00  14d+12:36:22.857  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00  14d+12:36:22.856  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00  14d+12:36:22.856  SET FEATURES [Set transfer mode]

Error 4988 occurred at disk power-on lifetime: 692 hours (28 days + 20 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 ff ff ff 0f

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ff ff ff 4f 00  14d+12:36:19.965  READ FPDMA QUEUED
  ef 10 02 00 00 00 a0 00  14d+12:36:19.965  SET FEATURES [Reserved for Serial ATA]
  27 00 00 00 00 00 e0 00  14d+12:36:19.965  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00  14d+12:36:19.964  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00  14d+12:36:19.964  SET FEATURES [Set transfer mode]

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%        20         -
# 2  Short offline       Completed without error       00%         9         -
# 3  Short offline       Completed without error       00%         9         -
# 4  Short offline       Completed without error       00%         5         -
# 5  Extended offline    Completed without error       00%         3         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Kod:
Mar 15 20:20:04 nsxxxxxx kernel: ata3.00: exception Emask 0x0 SAct 0x4000 SErr 0x0 action 0x0
Mar 15 20:20:04 nsxxxxxx kernel: ata3.00: irq_stat 0x40000008
Mar 15 20:20:04 nsxxxxxx kernel: ata3.00: failed command: READ FPDMA QUEUED
Mar 15 20:20:04 nsxxxxxx kernel: ata3.00: cmd 60/08:70:a0:17:07/00:00:e8:00:00/40 tag 14 ncq 4096 in
Mar 15 20:20:04 nsxxxxxx kernel:         res 41/40:08:a0:17:07/00:00:e8:00:00/00 Emask 0x409 (media error) 
Mar 15 20:20:04 nsxxxxxx kernel: ata3.00: status: { DRDY ERR }
Mar 15 20:20:04 nsxxxxxx kernel: ata3.00: error: { UNC }
Mar 15 20:20:04 nsxxxxxx kernel: ata3.00: configured for UDMA/133
Mar 15 20:20:04 nsxxxxxx kernel: ata3: EH complete
Mar 15 20:20:07 nsxxxxxx kernel: ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
Mar 15 20:20:07 nsxxxxxx kernel: ata3.00: irq_stat 0x40000008
Mar 15 20:20:07 nsxxxxxx kernel: ata3.00: failed command: READ FPDMA QUEUED
Mar 15 20:20:07 nsxxxxxx kernel: ata3.00: cmd 60/08:00:a0:17:07/00:00:e8:00:00/40 tag 0 ncq 4096 in
Mar 15 20:20:07 nsxxxxxx kernel:         res 41/40:08:a0:17:07/00:00:e8:00:00/00 Emask 0x409 (media error) 
Mar 15 20:20:07 nsxxxxxx kernel: ata3.00: status: { DRDY ERR }
Mar 15 20:20:07 nsxxxxxx kernel: ata3.00: error: { UNC }
Mar 15 20:20:07 nsxxxxxx kernel: ata3.00: configured for UDMA/133
Mar 15 20:20:07 nsxxxxxx kernel: ata3: EH complete
Mar 15 20:20:10 nsxxxxxx kernel: ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
Mar 15 20:20:10 nsxxxxxx kernel: ata3.00: irq_stat 0x40000008
Mar 15 20:20:10 nsxxxxxx kernel: ata3.00: failed command: READ FPDMA QUEUED
Mar 15 20:20:10 nsxxxxxx kernel: ata3.00: cmd 60/08:00:a0:17:07/00:00:e8:00:00/40 tag 0 ncq 4096 in
Mar 15 20:20:10 nsxxxxxx kernel:         res 41/40:08:a0:17:07/00:00:e8:00:00/00 Emask 0x409 (media error) 
Mar 15 20:20:10 nsxxxxxx kernel: ata3.00: status: { DRDY ERR }
Mar 15 20:20:10 nsxxxxxx kernel: ata3.00: error: { UNC }
Mar 15 20:20:10 nsxxxxxx kernel: ata3.00: configured for UDMA/133
Mar 15 20:20:10 nsxxxxxx kernel: ata3: EH complete

Kod:
Mar 15 20:26:15 nsxxxxxx kernel: ata3.00: failed command: WRITE FPDMA QUEUED
Mar 15 20:26:15 nsxxxxxx kernel: ata3.00: cmd 61/08:a8:c0:58:fe/00:00:71:00:00/40 tag 21 ncq 4096 out
Mar 15 20:26:15 nsxxxxxx kernel:         res 40/00:a8:c0:58:fe/00:00:71:00:00/40 Emask 0x1 (device error)
Mar 15 20:26:15 nsxxxxxx kernel: ata3.00: status: { DRDY }
Mar 15 20:26:15 nsxxxxxx kernel: ata3.00: failed command: WRITE FPDMA QUEUED
Mar 15 20:26:15 nsxxxxxx kernel: ata3.00: cmd 61/08:b0:18:59:fe/00:00:71:00:00/40 tag 22 ncq 4096 out
Mar 15 20:26:15 nsxxxxxx kernel:         res 40/00:a8:c0:58:fe/00:00:71:00:00/40 Emask 0x1 (device error)
Mar 15 20:26:15 nsxxxxxx kernel: ata3.00: status: { DRDY }
Mar 15 20:26:15 nsxxxxxx kernel: ata3.00: failed command: WRITE FPDMA QUEUED
Mar 15 20:26:15 nsxxxxxx kernel: ata3.00: cmd 61/08:b8:38:64:fe/00:00:71:00:00/40 tag 23 ncq 4096 out
Mar 15 20:26:15 nsxxxxxx kernel:         res 40/00:a8:c0:58:fe/00:00:71:00:00/40 Emask 0x1 (device error)
Mar 15 20:26:15 nsxxxxxx kernel: ata3.00: status: { DRDY }