We are in the process of migrating this forum. A new space will be available soon. We are sorry for the inconvenience.

[SPRZEDAM] Kimsufi i7-2T


Spacedust
21-08-2010, 13:26
Sprzedany !

Spacedust
21-08-2010, 11:26
Jest 140 zł.

Spacedust
20-08-2010, 23:45
Cytat Napisał Deqeen
moge dac 130zl.
ile kosz przedłużenia?
Koszt przedłużenia tyle co w ofercie: 209,99 PLN netto / miesiąc

Jutro rano możemy dobić targu. Proszę pisać na PW.

Deqeen
20-08-2010, 23:38
moge dac 130zl.
ile kosz przedłużenia?

Spacedust
20-08-2010, 21:39
Jest 130 zł.

Spacedust
20-08-2010, 14:40
Jest pierwsza oferta na 120 zł. Kto da więcej ?

Spacedust
20-08-2010, 13:55
Do sprzedania serwer Kimsufi i7-2T o następujących parametrach:

1. Procesor: Intel Core i7 920 2.67 GHz 8 MB Cache HT + aktywne turbo mode do 2.93 GHz (widziany jako 8 rdzeni)
2. Pamięć: 8 GB DDR3 1333 MHz Kingston Triple Channel (4 kości po 2 GB - te moduły są świetne, bo czasami dają ledwo 1066 MHz)
3. Płyta główna: SuperMicro X8STi wgrany najnowszy BIOS 1.0c
4. Dyski: 2xSeagate Barracuda 7200.12 ST31000528AS 1TB 32MB SATA-II wgrany najnowszy firmware CC46 (mają ledwo 3 miesiące, bo zostały wymienione na fabrycznie nowe 28 maja) - do wyboru Software RAID 0 lub 1.
5. Łącze: 100 Mbps z limitem 3 TB, potem 10 Mbps
6. Ma 1 IP główne + 3 IP failover (jeszcze nie wykupione) oraz backup FTP 100 GB.

Serwer ważny do: 2010-08-22

Oferty na PW.

Kod:
/dev/sda:
 Timing cached reads:   35940 MB in  2.00 seconds = 17987.62 MB/sec
 Timing buffered disk reads:  364 MB in  3.00 seconds = 121.17 MB/sec
Kod:
/dev/sdb:
 Timing cached reads:   35060 MB in  2.00 seconds = 17544.95 MB/sec
 Timing buffered disk reads:  364 MB in  3.01 seconds = 121.08 MB/sec
Kod:
/dev/md2:
 Timing cached reads:   34828 MB in  2.00 seconds = 17429.17 MB/sec
 Timing buffered disk reads:  706 MB in  3.01 seconds = 234.83 MB/sec
Kod:
smartctl -a /dev/sda
smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     ST31000528AS
Serial Number:    9VP5HJNE
Firmware Version: CC46
User Capacity:    1,000,204,886,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Fri Aug 20 14:59:48 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 ( 600) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 173) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x103f) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   117   099   006    Pre-fail  Always       -       126817200
  3 Spin_Up_Time            0x0003   095   095   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       110
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   086   060   030    Pre-fail  Always       -       466940047
  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       2030
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       55
183 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
184 Unknown_Attribute       0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Unknown_Attribute       0x0032   098   094   000    Old_age   Always       -       72
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   057   048   045    Old_age   Always       -       43 (Lifetime Min/Max 42/43)
194 Temperature_Celsius     0x0022   043   052   000    Old_age   Always       -       43 (0 19 0 0)
195 Hardware_ECC_Recovered  0x001a   036   021   000    Old_age   Always       -       126817200
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       166717745530996
241 Unknown_Attribute       0x0000   100   253   000    Old_age   Offline      -       565888975
242 Unknown_Attribute       0x0000   100   253   000    Old_age   Offline      -       2554093015

SMART Error Log Version: 1
No Errors Logged


SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Kod:
smartctl -a /dev/sdb
smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     ST31000528AS
Serial Number:    9VP5HN77
Firmware Version: CC46
User Capacity:    1,000,204,886,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Fri Aug 20 15:00:14 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 ( 600) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 173) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x103f) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   107   099   006    Pre-fail  Always       -       13872761
  3 Spin_Up_Time            0x0003   095   095   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       112
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   086   060   030    Pre-fail  Always       -       414544264
  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       2038
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       56
183 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
184 Unknown_Attribute       0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   056   047   045    Old_age   Always       -       44 (Lifetime Min/Max 43/44)
194 Temperature_Celsius     0x0022   044   053   000    Old_age   Always       -       44 (0 17 0 0)
195 Hardware_ECC_Recovered  0x001a   038   036   000    Old_age   Always       -       13872761
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       116131620718731
241 Unknown_Attribute       0x0000   100   253   000    Old_age   Offline      -       1608888276
242 Unknown_Attribute       0x0000   100   253   000    Old_age   Offline      -       3341224769

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Kod:
processor       : 7
vendor_id       : GenuineIntel
cpu family      : 6
model           : 26
model name      : Intel(R) Core(TM) i7 CPU         920  @ 2.67GHz
stepping        : 5
cpu MHz         : 2668.000
cache size      : 8192 KB
Manufacturer: Supermicro
Product Name: X8STi

Vendor: American Megatrends Inc.
Version: 1.0c
Release Date: 03/10/2010
dmidecode | grep MHz
External Clock: 133 MHz
Max Speed: 2666 MHz
Current Speed: 2666 MHz
Speed: 1333 MHz (0.8 ns)
Speed: 1333 MHz (0.8 ns)
Speed: 1333 MHz (0.8 ns)
Speed: 1333 MHz (0.8 ns)
Speed: 1333 MHz (0.8 ns)
Speed: 1333 MHz (0.8 ns)
Speed: 33 MHz (30.3 ns)
Cpu speed from cpuinfo 2660.00Mhz
cpuinfo might be wrong if cpufreq is enabled. To guess correctly try estimating via tsc
Linux's inbuilt cpu_khz code emulated now
True Frequency (without accounting Turbo) 2660 MHz
CPU Multiplier 20x || Bus clock frequency (BCLK) 133.00 MHz

Socket [0] - [physical cores=4, logical cores=8, max online cores ever=4]
TURBO ENABLED on 4 Cores, Hyper Threading ON
True Frequency 2793.00 MHz (133.00 x [21])
Max TURBO Multiplier (if Enabled) with 1/2/3/4 Cores is 22x/21x/21x/21x
Current Frequency 2902.95 MHz (Max of below)
Core [core-id] :Actual Freq (Mult.) C0% Halt(C1)% C3 % C6 %
Core 1 [0]: 2580.60 (19.40x) 1 0.847 98.4 0
Core 2 [1]: 2498.39 (18.78x) 3.17 2.23 94.8 0
Core 3 [2]: 2740.49 (20.61x) 1.2 0.35 98.4 0
Core 4 [3]: 2902.95 (21.83x) 99.8 0 0 0