We are in the process of migrating this forum. A new space will be available soon. We are sorry for the inconvenience.

[Sprzedam] Q-1T


analyzer
20-07-2010, 08:59
Sprzedany.

analyzer
17-07-2010, 08:44
Oferta aktualna można delikatnie negocjować cenę.

analyzer
16-07-2010, 00:32
Kod:
smartctl -a /dev/sda
smartctl 5.40 2010-03-16 r3077 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi Deskstar 7K1000
Device Model:     Hitachi HDS721010KLA330
Serial Number:    GTH000PAH1AWPH
Firmware Version: GKAOA70M
User Capacity:    1,000,204,886,016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   7
ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 1
Local Time is:    Fri Jul 16 01:36:34 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (15354) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 255) minutes.
SCT capabilities:              (0x003f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   130   130   054    Pre-fail  Offline      -       151
  3 Spin_Up_Time            0x0007   118   118   024    Pre-fail  Always       -       606 (Average 579)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       36
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   134   134   020    Pre-fail  Offline      -       32
  9 Power_On_Hours          0x0012   098   098   000    Old_age   Always       -       16075
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       36
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       59
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       59
194 Temperature_Celsius     0x0002   153   153   000    Old_age   Always       -       39 (Lifetime Min/Max 18/56)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Kod:
model name      : Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz

Spacedust
13-07-2010, 11:40
Pokaż smartctl -a /dev/sda i jakiego ma procka Q6600 czy Q6700.

analyzer
13-07-2010, 02:25
Oferta nadal aktualna serwer jest do 18.07 i tego dnia mogę jego oddać. Cena odstępnego standardowa 100 zł.

analyzer
07-07-2010, 07:14
Sprzedam serwer kimsufi Q-1T + zastosowanie profesjonalne + switchport.

Oferty prosze przesyłać na maila analyzer@g.pl